Looking for:
Windows was unable to complete the format memory card software free download free - |
- Windows was unable to complete the format memory card software free download free
You can choose the solution based on your situation. Solution 1: Format partition in Windows Disk Management. Disk Management is a built-in tool in Windows, and it is provided to help users manage disks and partitions attached to computer. Now you can try formatting the partition in Disk Management:. Step 1. Launch Disk Management.
Right-click on Windows Start menu and select Disk Management , as follows:. Step 2. Choose the partition you want to format, right-click it and select Format option. Then click Yes when Windows prompts all data on the partition will be lost. Step 3. Select a file system type you need, check the "Perform a quick format" option and click OK button. Another message box will pop up, telling formatting this volume will erase all data on it and prompting to backup data you want to keep before formatting.
Click OK button and Windows starts to format the partition at once. Here is how to format a partition in DiskGenius. Free download, install and launch DiskGenius Free edition on your computer.
Right-click on the partition to be formatted, and select Format Current Partition from context menu, as below:. Select a file system type from the dropdown list and click Format button. Click Yes when the software asks to confirm the operation. Type cmd in Windows searching box to find out Command Prompt , right-click it and choose Run as administrator , as the picture below:. Type diskpart in Command Prompt and press Enter key. Now continue executing following command to complete the format.
Remember to hit Enter key after each command. Removable storage devices are not produced with any anti-virus software, and they can infect virus when they are used on computers that are not protected by anti-virus software. When you cannot format the device, you can run an anti-virus scan for the device to clean up all possible virus and malware. Some third-party anti-virus software can run an automatic scan for inserted disk, and thus is not recommended to disable antivirus software before connecting external drive.
If you have not installed any anti-virus software, you can simply enable Windows Defender which also works well in most situations. Some memory cards and USB flash drives are produced with a physical write-protection switch. In that case, you can neither formatting the drive nor making other changes. If the removable disk does not have such a switch, you can refer to this guide to remove write protection: How to fix "The disk is write protected" error on USB drives?
Solution 6: Check and repair errors for the drive. Disk checking is another useful utility provided by Windows, and it can help users to check the drive for file system errors. Follow steps here to run a disk check for the drive:. Right-click the partition that Windows cannot format and select Properties option. Select Tools tab and click Check button under error checking.
Then click Scan and repair drive on pop-up window, and wait for the process to finish. Note: you won't be able to use the drive while Windows finds and repairs any errors.
This might take a while, and you might need to restart your computer. Solution 7: Check and repair bad sectors for the disk.
Bad sector is one of the major causes of "Windows was unable to complete the format" error, and you can have a check for your disk to see if it contains bad sectors with DiskGenius Free Edition.
Moreover, you can try repairing bad sectors if the scanning reports the disk have bad sectors. Note : Bad sector repairing is not helpful for data recovery, instead, it may cause further damage to data. Hence, it is suggested to back up files before repairing bad sectors. Click Start Repair button, and DiskGenius starts to scan the disk to verify if there are bad sectors. Tip: Close all programs that are accessing the disk and do not access the disk during the scanning in order to get an accurate result.
It is a common occurrence that partition turns to RAW before we can back up files in it. No worries, it is not that complicated to recover lost files. Select the partition where lost files were stored, click File Recovery and click Start button. After that, DiskGenius starts to search for lost data.
Wait for the scanning to complete. Preview files to check if lost files are recoverable. File preview is allowed during and after scanning, and it helps to verify if lost files can be recovered correctly.
It happens that lost files got damaged after data loss, and thus you need to preview files to make sure if wanted files are corrupted. It refers to the error message reported by system when Windows fails to format a drive. The error can be caused by many factors, for example, virus, bad sectors, write protection, disk physical damages, etc.
You can follow solutions mentioned above to get this error fixed. When it comes to reasons why USB cannot be formatted, there are two aspects: write protection and bad sectors. There might be a physical switch on the USB drive, which is designed to lock the disk. If Windows still was unable to format the USB after removing write protection, you can check bad sectors for the disk using DiskGenius.
When Windows 10 cannot complete the format for SD card, you can try force formatting it via Diskpart:. In the content above, we discussed the error "Windows was unable to complete the format" and provided 7 solutions to fix it. If your disk still cannot be formatted after trying all these solutions, the disk must be physically damaged. In that case, you can either send the disk to us to recover data or contact its manufacturer to get it repaired.
Should you need any help, feel free to leave a comment or email us. Data Recovery Data Recovery. DiskGenius is professional data recovery software, it can help you get back lost files or partitions, recover RAW drives easily. All storage devices consist of sectors which are the smallest unite for data storing. If your storage device is damaged, you cannot access it. When your memory card is write-protected, you can only read it.
If you try to change data on the write-protected drive, it may give you an error message: The disk is write protected. Remove the write protection or use another disk. If it has a physical damage, then you need change a new one. If not, you need to check errors on the memory card and fix the errors. If there is no error on the card, you need to consider whether it has virus infection.
For this situation, you need to install an anti-virus software to solve the problem. If it is because of the write protection, you can try the following solutions. Windows Disk Management is a disk partition manager provided by Windows. It can even format damaged flash drives. To solve Windows was unable to format memory card, you can follow the steps below:. Step 1. Connect your memory card to your computer, make sure it can be detected by your computer.
Step 2. In the main interface, you can see all storage devices on your computer. Step 3. Right click the memory card, select Format.
Then, it will pop up a small window that you can select file system to perform. However, this action is not workable in some cases, for example, if the storage device has no partition, or the drive has RAW file system, the Windows was unable to format.
Then, you have to recreate new partition for the memory card formatting:. No matter the drive has no partition, or the drive has RAW file system, it can solve it. Here, you can setup the new partition including the file system, here we create a FAT32 partition.
No comments:
Post a Comment